WimTec Santec SKY Montage- Und Bedienungsanleitung Seite 21

Configuring the functions
Stagnation rinse:
DIP switch 4
Serves to rinse water supply lines in order to remove stagnant water that accumulates during
longer periods of disuse.
'ON' position:
Stagnation rinse is enabled.
'OFF' position:
Stagnation rinse function is disabled (default setting).
Time interval
Can be set at 3 or 24 h at
the interval control.
3 / 24 h
Stagnation rinse inteval:
DIP switch 5
You can select one of two predefined intervals (3 h or 24 h).
'ON' position:
Stagnation rinse interval is set to 3 h.
'OFF' position: Stagnation rinse interval is set to 24 h.
SKY
Automatic stagnation rinse
If the fitting has not been
used for the set period, a
stagnation rinse operation is
performed for the duration
configured.
SanTec SKY
Washbasin fitting
EN
ON
OFF
1 2 3 4 5 6
ON
OFF
1 2 3 4 5 6
21