WimTec Santec SKY Montage- Und Bedienungsanleitung Seite 19

Configuring the functions
Flushing mode:
DIP switch 1
'ON' position:
Automatic program enabled.
'OFF' position: Manual program enabled.
Cleaning stop:
DIP switch 2
Serves to disable the fitting prior to cleaning.
'ON' position: Cleaning stop function enabled.
'OFF' position: Cleaning stop function disabled (default setting).
Enable cleaning stop
Touch the metal outlet before
water flows starts and tip
on the sensor ring until the
water flow stops. (approx.
5 x in 2 s). The water flow
stops and the cleaning stop is
enabled.
SKY
Disable cleaning stop
3 min. after leaving the active
range the fitting switches into
normal mode.
To instantly end cleaning stop,
perform the same steps as
used for 'Enable
cleaning stop'.
5 x
SanTec SKY
Washbasin fitting
EN
ON
OFF
1 2 3 4 5 6
ON
OFF
1 2 3 4 5 6
19