Listo RMDL85-50hob2 Bedienungsanleitung Seite 4

DOOR REVERSAL
Tools required: Cross-headed screwdriver,
spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, you needto tilt the unit backwards.You should rest the unit on
something solid so that it doesn't slip during the door reversing process.
• All parts removed must be saved to reinstall the door.
• Do not lay the unit flat, asthis may damagethe coolant system.
• It's better that 2 people handle the unit during assembly.
1. Carefully removethe top hinge cover with a flat screwdriver.
2. Unscrew the top hinge with a cross-headed screwdriver.
3. Remove the hole cover with a fiat screwdriver.
v.l.o
PROCEDURE
Flat-bladed screwdriver, Hexagonal
6
4. Move the core cover from the left side to the right. Then lift the upper door and
place it on a paddedsurface to prevent it from getting scratched.
5. Unscrew the middle hinge and then lift the bottom door and put it on a soft pad
to avoid it getting scratched.
6. Move the two middle hole covers from left to right.
7. Lie the rear of the cabinet on a soft pad. Unscrew the bottom hinge and levelling
foot.
7 v.l.o