Singer ESP2 Bedienungsanleitung Seite 5

25. Always put the appliance in a secure and level place on a table or counter when
using.
26. This unit is for household use only.
27. Do not allow cord to touch hot surfaces. Let appliance cool completely before putting
away. Loop cord loosely around appliances when storing.
28.This appliance must be grounded. Do not alter the plug or attempt to defeat this
feature.
29.Before plugging in the steam press, be sure the electrical information on the label
agrees with your power supply.
7
10
3
GETTING TO KNOW YOUR STEAM PRESS
1. The Pressing Handle raises and lowers the Pressing Plate.
2. The Locking Knob will lock together the Pressing Plate and the Ironing Board. Use
this to carry or store the Steam Press.
3. The Steam Burst Buttons on either side of the Pressing Handle produce a burst of
steam when pressed.
4. The Pressing Plate is the temperature controlled surface that heats and presses the
fabric.
5. The Ironing Board is the padded surface that holds the fabric during pressing. It has
a removable cover that is washable.
6. The ON/OFF Switch.
7. The Power Indicator Light illuminates when On/Off Switch is et to the"On"position,
providing you with a clear visual indication that the unit is powered on.
8. The Pressing Indicator Light illuminates while the unit is heating to the selected
temperature, and deactivates to provide a clear visual indication that you are ready to
begin pressing.
9. The Steam Ready Indicator Light illuminates once the unit is ready to produce
bursts of steam, providing you with a clear visual indication that you can begin using
the Steam Burst Buttons.
10. The Temperature Control Buttons are used to select a desired temperature by cycling
through the list of choices above the buttons. Push the Temperature Control Buttons
struction Manual.indd 3
SAVE THESE INSTRUCTIONS
8
9
7
8
1
13
14
12
2
9
10
11
5
6
4
23.12.2011 15:25
GBR
3