Table Height Adjustment; Electrical Height Adjustment Of Lift - Steelcase Possilio Bedienungsanleitung

NOTE
Risk of damage to the control panel!
}
Do not lean on the control panel.
}
Do not place any objects on the control panel.
}
Do not pour liquids over the control panel.
Ensure that the connecting cables of all devices on
the desk are long enough.

5.2 Table height adjustment

On the Lift 2 variant, the height of the table Possilio® is
adjusted by an electromotive stepless lifting process.
Ergonomics: Optimum desk height
The adjustment to the optimum desk height (sitting height) is
crucial for the correct sitting posture at the workstation. The
correct desk height setting for the workstation can be found in
the workstation analysis (pursuant to the German Occu-
pational Safety and Health Act, the German VDU Workplace
Ordinance, or accident prevention regulations, for example).
See also DGUV Information 215-410 "Screen and office work-
stations: Design guidelines"
table/work surface.

5.2.1 Electrical height adjustment of Lift 2

The Possilio® product can be variably adjusted by means of
an electric motor to a height of between 650 mm and
1250 mm.
Before first use, ensure that:
5 Operating and adjusting
from page 51, section 8.3.1 Work
EN
33