Steelcase Possilio Bedienungsanleitung Seite 48

5 Operating and adjusting
Paddle Up/Down with LED (PUI04)
Height adjustment
Manual reset of desktop
Wait for 5 seconds if the desk has just been connected to the
mains.
EN
Releasing the control panel before the process is
completed will interrupt the manual resetting
process and it must be started anew.
Resetting to factory settings
Please note that all personal settings and memory positions
will be deleted and reset to factory settings.
48
1. Pull or press the "Control lever" to reach the
desired desk height.
=
The desktop moves up or down. The lever is
illuminated as long as it is pressed.
2. Releasing the "Control lever".
ü The desktop stops at the desired point. The display
indicates the desk height.
1. Press and hold the "Down" control lever.
=
The lower end position is reached.
2. Release the "Down" control lever.
=
The desk moves to minimum position; the reset and
initialisation process starts.
ü Reset and initialisation process is completed.
1. Press the "Function button" (on the underside of
the casing) for 10 seconds.