Tescoma 4food Bedienungsanleitung Seite 5

Legend
1. Touch control
2. Inlet for USB-C connector
3. Vacuum attachment
4. USB-C charging cable
Charging
Charge the vacuum pump fully before first use. Connect the USB-C cable
A
to the inlet on the upper part of the pump , then plug the other
end into a mobile phone charger with a 1 A output. Plug the charger
into a 230 V power outlet. The built-in battery will start charging,
and the touch button will light up red. Once the backlight changes to
green, the battery is fully charged, and the charging process will end
automatically.
Notice
Do not use the vacuum pump with fast chargers; the allowable output
of the charging adapter is 1 A.
Useful hint
The vacuum pump can be used for vacuum-sealing even while charging.
In this case, the touch control backlight will be yellow until you remove
the pump from the vacuum-sealable container.
Vacuum-sealing
Place the pump on the vacuum valve of the lid, bag, or closure of
a container with food inside, ensuring that the pump's attachment fully
B
overlaps the valve. Press the pump gently and touch the control .
Extraction will begin, and a vacuum will be created, sealing the pump
to the surface. The touch control will light up green during extraction.
Once the pump has extracted air from the container or bag, extraction
will shut off automatically, and the green backlight will turn off.
5