General Specifications - TRACOpower TSP 070-112 Bedienungsanleutung

6.3 General Specifications

Operating Temperature Range
Cooling
Storage Temperature Range
Load Derating above +40°C (104°F)
Humidity (non condensing)
Pollution Degree
Temperature Coefficient
Reliability, calculated MTBF
Switching Frequency
Remote ON/OFF
Safety class
Case protection
Isolation
Safety Standards - Information Technology Equipment
according to
- Industrial Control Equipment
- Electrical Equipment of machines
- Electronic Equipment of power installation
- Control Equipment for Hazardous Locations
- Control Equipment for Hazardous Locations
- Control Equipment for Hazardous Locations
- Safety Transformers for SMPS
- Limited power source (model TSP 090-124N)
Safety Approvals
Electromagnetic compatibility
(EMC) Emissions
Electromagnetic compatibility
(EMC) Immunity
Immunity to conducted radio frequency disturbances [0.15 –
Environment
Enclosure Material
Mounting
Connection
See Fig. 4.1 and Fig. 4.2
in accordance to IEC 61709
depending on Model
see Fig. 5.1, 5.2, 5.3 & 5.4
in accordance to IEC 536
in accordance to IEC 529
in accordance to the product family
standard Power Supply Industrial
Conducted EMI on terminals
Radiated EMI
Input Current harmonics
Flicker
in accordance to the product family
standard Power Supply Industrial
Electrostatic discharge (ESD)
Electrostatic discharge (ESD)
Radiated RF Fields [80 – 1000MHz]
Electrical fast transients / Bursts
Electrical fast transients / Bursts
Surge (Mains Supply)
Surge (Mains Supply)
Surge (Signal Supply)
80MHz]
Voltage Dips
Vibration
Shock
DIN-Rail mounting
Wall mounting
Tel: +41 43 311 4511
Jenatschstrasse 1
Fax: +41 43 311 4545
CH-8002 Zürich
-25°C ... +70°C (above +40°C load derating)
-13°F ... +158°F (above +104°F load derating)
Convection cooling; no internal fan
-25°C ... +85°C
-13°F ... +185°F
see Fig. 4.1
95% rel H max.
2
0.02%/K
>350'000 hours
50 ... 140kHz typ.
2 pin connector (see Fig. 3.1)
connect –S via a 1kΩ to –Vout
Class 1
IP20
See Safety Standards
IEC / UL / EN 60950
UL 508C
EN 60204
EN 50178
IEC/EN 60079-15 (category 3G (Gas), Zone 2; EEX nAC II C (T4)
SEV 05 ATEX 0146 U)
ANSI/UL 60079-15 (Protection Type « n » Class I, Zone 2, AEX nC II T4 U)
FM3611 (Class I and II, Division 2, Class III Division 1 and 2)
ANSI/ISA 12.12.01 (Class I and II Division 2, Class III Division 1 and 2
EN 61558-2-8
EN 60950 sec. 2.5 and NEC Class 2
CB-Scheme as per IEC 60950
UL / cUL 60950 recognised
UL / cUL 508 listed
ATEX 94/9/EC (category 3G (Gas), Zone 2; EEX nAC II C (T4)
SEV 05 ATEX 0146 U)
ANSI/UL 60079-15 (Protection Type « n » Class I, Zone 2,
AEX nC II T4 U)
FM3611 (Class I and II, Division 2, Class III Division 1 and 2)
ANSI/ISA 12.12.01 (Class I and II Division 2, Class III Division 1 and 2
EN 50178
EN 61558-2-8
EN 61204-3
Area
EN 55022 Class B, EN 55011 Class B, FCC Part 15-B
EN 55022 Class B, EN 55011 Class B, FCC Part 15-B
EN 61000-3-2 Class A
• TSP 070-112 and TSP 090-124
• TSP 140-112 and TSP 180-124
• TSP 360-124
• TSP 600-124
EN 61000-3-3
EN 61204-3
Area
Standard Level
EN 61000-4-2 ±4kV Contact discharge
EN 61000-4-2 ±8kV Air discharge
EN 61000-4-3 10V/m
EN 61000-4-4 ±2kV Mains Supply
EN 61000-4-4 ±1kV Signal Supply
EN 61000-4-5 ±1kV between L & N
EN 61000-4-5 ±2kV between L & PE and N & PE
EN 61000-4-5 ±1kV between ax & PE
EN 61000-4-6 10V
EN 61000-4-11 70% UN / 40%/100% UN
IEC 60068-2-6 3 axis, sine sweep, 10 ... 55Hz, 1g, 1oct/min.
IEC 60068-2-27 3 axis, 15g, half sine, 11ms
Aluminium (Chassis) / Zinc plated Steel (Cover)
For DIN-Rails as per EN 50022-35 x 15 / 7.5
(snap-on self-locking spring)
With wall mounting bracket
(see datasheet page 10)
Pluggable screw terminals (plugs included)
sales@traco.ch
www.tracopower.com
Device off
up to full output power
up to 120 watt only
up to 240 watt only
up to 480 watt only
Description
option TSP-WMK01 for TSP 070, 090, 140 & 180
option TSP-WMK02 for TSP 360 & 600
Date:
10 October 2005
Issue: 2.1
English
Perf. criteria
B
B
B
B
B
B
B
B
B
B / C
Page
8
Seite