Decoderwerk 30403 Benutzerhandbuch Seite 24

Commissioning
Connecting uncoupling tracks
In contrast to point machines, uncoupling tracks
◆
only have two connection cables.
The decoder has four outputs with 3
◆
connections.
The middle connection is the supply line
◆
with positive voltage pole.
The G and R connections are each the return
◆
line with a negative voltage pole.
Two uncoupling tracks can be connected to
◆
one output by sharing the middle connection.
Connect outputs
If the output is switched via a command from the control
center, either connection G or R is switched through and
thus decoupling track 1
or uncoupling track 2 is activated.
Switching time
The preset switching time of the decoder is
◆
400ms.
For uncoupling tracks, it is advisable to set
◆
the switching time to 1000ms, i.e. 1 second.
increase.
Take your time
If the switching time is increased to 1 second,
◆
the uncoupling track remains activated as long
as the button on the central unit is pressed.
This allows you to precisely control the
◆
uncoupling process.
8