Residual Risks; Operator Obligations - Spanset Powerforce Originalbetriebsanleitung

13
Unintentional unhooking due to an unsuitable load hook.
14
Attaching the load to round slings.
15
Use in acids and/or alkalis
16
Swinging or rotating the load
17
The opening angle of the lifting strap loops must not exceed 20°
18
Use in potentially explosive atmospheres
19
Extension by nesting of lifting straps
20
Extension by interlacing of lifting straps
21
Lace-up procedure without suitable fitting parts (e.g. D-clamp)
22
Continuous load
PowerForce lifting straps must not be used in the following
cases:
– If the label is missing
– If the fabric has been in contact with acid or alkali
– If the fabric has been damaged by heat (e.g. welding beads or hot
surfaces)
– If the supporting seam is damaged

3.6 Residual risks

Danger to life due to falling loads!
Death or serious injury can be caused by falling loads if the Power-
Force lifting straps are used in a way that is prohibited. Use Power-
Force lifting straps strictly as intended and follow the safety regula-
tions (see point 3. to 3.5)!

3.7 Operator obligations

The operator of the PowerForce lifting straps is obligated to perform a
minimum of the following duties:
– Ensuring that the safety instructions and handling recommendations
in this manual are followed
– Identifying and implementing all occupational health and safety
measures
– Determining the frequency of checks and maintenance work
b
, damaged or illegible (see envelope)
IV
DANGER
2
22