Spanset PowerForce Originalbetriebsanleitung Seite 20

The lifting straps are supplied in the following delivery models:
A)
– Loop strap single-layer with loop reinforcement
(POWERFORCE HA) abbr.: PF HA
B)
– Endless lifting strap single-layered
(POWERFORCE HD) abbr.: PF HD
C)
– Loop lifting strap with fittings D1-clamp
(POWERFORCE D1D1) abbr.: PF D1D1
D)
– Loop lifting strap with push-through fittings D1 and D2-clamp
(POWERFORCE D1D2) abbr.: PF D1D2
A more detailed description of the lifting straps can be found in this
operating manual under point 4.1 Technical data.
2.1 Labelling
Each PowerForce lifting strap is clearly marked by a sewn label
(see cover) and these instructions. Every PowerForce lifting strap can
be identified via its markings. In addition, the markings on the label
contain important instructions on use.
b
18
IV