Cleaning; Transport; Storage - Parkside Performance Hg13526 Bedienungsanleitung/Originalbetriebsanleitung

NOTE
Make sure the gear on the blade
u
insert is again engaged with
[ 22 ]
motor gear exactly (as long as they
can engaged exactly, the position
doesn't matter). otherwise may
damage the machine.
Bearing must be placed under
u 5a ] [
washer during assembly.
5b ] [
˜ Cleaning
NOTICE!
m
You should have any repair and
u
maintenance work that is not
described in this instruction
manual carried out by our Service
Centre. Only use original parts.
This is how to avoid damage to the
u
equipment and possible personal
injuries resulting from this.
WARNING!
m
Pull the battery out of the device
u
before carrying out any work.
WARNING!
c
There is a risk of electric shock or
u
injury from moving parts.
WARNING!
m
Wear gloves when handling the
blade. Risk of cut injuries.
NOTICE!
m
Do not use any cleaning agents
u
or solvents. This could damage
the device irreparably. Chemical
substances may attack the plastic
parts of the machine.
Perform the following maintenance
and cleaning work regularly. This will
guarantee long and reliable use.
Check the device before each use
o
for obvious defects such as loose,
worn or damaged parts. Check the
hand tightness of the screws
and the gear nut
Do not cut with a dull or worn blade,
o
otherwise you will overload the
motor and gears of your device.
Keep the two blades, the ventilation
o
slot and the motor housing of the
8 ] [
device clean. Use a damp cloth or
brush to do this. The device must
neither be sprayed with water nor be
put into water.
˜ Transport
Transport the device when it is
o
switched off and with the blade
guard fitted.
1 ] [
˜ Storage
Clean the device prior to storage.
o
Store the device in the storage case
o
in a dry place and out of the
[ 19 ]
reach of children with the supplied
blade guard
1 ] [
[ 4 ] 20 ] [
.
3 ] [
in place.
GB/IE 37