How To Use Home Energy Management System; Create An Energy System - Zendure Solarflow 2400 Ac+ Bedienungsanleitung

EN

10.5 How to Use Home Energy Management System

10.5.1 Create An Energy System

Create on the Home interface.
1. Create System: Click on "Create System".
2. Create Energy System: Read the system introduction, and click "Start" to enter the next interface.
3. Select a region/country: Follow the instructions to select the national standard for device installation in your
country, and click "Next step" to enter the next interface.
4. Select Device: Select the device. To create a system, there must be an energy storage device. Click "Support
Device" to view devices that support to be added into a system. If there are Meters or Plugs in your home,
you can add them to the system synchronously. Click "Next step" to enter the next interface.
5. Safety Settings: Set the maximum output power and maximum input power allowed by the system to ensure
that the system operates at a safe value. After completion, click "Next Step" to enter the next interface.
6. Base Load Settings: The charging and discharging power plan from 0:00 to 24:00. If the user does not set
it, it will be a constant power output of 200W. When the system does not have a Smart Meter or Smart
Appliances, it will input and output according to the power set by the basic load.
As shown in the pictures, it is set to charge 200W from the grid from 08:00 to 15:00. If the system is not bound
to a Smart Meter or Smart Appliances, the system will maintain a discharge action of 200W during the time
period from 00:00 to 08:00, maintain a charge action of 200W during the time period from 08:00 to 15:00, and
maintain a discharge action of 200W during the time period from 15:00 to 24:00.
22