Cable Managemet; Connect To The Add-On Batteries - Zendure Solarflow 2400 Ac+ Bedienungsanleitung

EN
7.3.1 Cable Management
The SolarFlow 2400AC+ should be positioned so that the solar and AC cables can run straight down without
significant bending.

7.3.2 Connect to the Add-on Batteries

Remove the silicone protective cover from the battery terminals on the SolarFlow 2400 AC+ and Add-on Batteries
(sold separately).
Connect the Add-on Batteries to the SolarFlow 2400 AC+ by stacking them underneath, ensuring the battery cable
terminals lock into place.
A single SolarFlow 2400 AC+ can be connected up to 5 AB1000/AB2000/AB3000L series batteries, which can
maximumly reach to 16.8kWh capacity.
• Do not disconnect them during the charging/discharging process.
• Do not touch the metal pins of the ports with your hands or other objects. Gently clean them with a dry cloth
when necessary.
• It is recommended to use the brackets and screws provided with the battery packs to securely fix the SolarFlow
2400 AC+ on the top and ensure stability.
11