Adjusting The Sound Characteristics; Quickly Attenuating The Sound - Sony CDX-MP80 Bedienungsanleitung

(With optional unit)
To Do this
Skip discs Push in and rotate [once for
– Disc selection each disc] the control.
To continuously skip discs,
push in and rotate once and
rotate again within 1 second
(and hold) the control.
Skip albums Push in and rotate the
– Album selection control [hold for a moment]
and release.
To continuously skip
albums, push in and rotate
again (and hold) within 1
second of first releasing the
control.
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
To increase
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SOUND) for 2 seconds while
pushing the VOL control.
To decrease
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, fader,
and subwoofer volume.
The bass and treble levels and subwoofer volume
can be stored independently for each source.
VOL control dial
1
Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2
Press the VOL control dial repeatedly
to select the item you want to adjust.
Each time you press the VOL control dial, the
item changes as follows:
DSO t EQ7 t BAS (bass)
t TRE (treble) t BAL (left-right)
t FAD (front-rear)
t SUB (subwoofer volume)
3
Rotate the VOL control dial to adjust
the selected item.
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
(With the rotary commander or the card
remote commander)
Press (ATT) on the rotary commander
or card remote commander.
"ATT on" appears in the display momentarily.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
23