Lenz Digital plus STANDARD Informationen Seite 32

32
1
51 Bit Braking configuration
1 (0) 1
2-5 (1-4) not used
6 (5) 1
7–8 (6-7) Not used
0-255 Braking distance with activated constant braking distance
52
0-255 Sets brightness at function outputs A and C, 255=max
55
0-255 Sets brightness at function output B, 255=max
56
57 Function mapping:
Each bit of the CV stands for a function of the digital system:
-
Bit 1(0) for function 1, Bit 2(1) for function 2 and so on up to
59
Bit 8(7) for function 8. If you wish to allocate a function to the
dimming, the respective bit must be set.
0-255
57 Dimming (no ex-works setting)
0-255
58 Shunting speed (ex-works setting F3)
0-255
59 Switching off the delay (ex-works setting F4)
0-255 Lighting effect at function outputs A and B. The units digit of the
60
value stands for function output A, the tens digit for function
output B:
0
1
2
Low-frequency motor control (approx. 19 Hz)
Constant braking distance activated
Stopping with DC independent of the polarity (only if Bit 3 is
deleted in CV29).
No effect
Marslight
Gyrolight
Information STANDARD Decoder
0 (dec)
0
0
0
0
50
255
255
0
4
8
0