tepro BILOXI Bedienungsanleitung Seite 30

t
12. Fasten the cross braces (15) onto the
support legs using eight M6 x 15 mm
screws. Do not yet tighten the screws.
15
13. Fasten the support bar for the small
grill chamber (23) to the left support
legs using two M6 x 15 mm screws.
Do not yet tighten the screws.
23
30
P140038_TEPRO_BILOXI_GrillSmoker_1087_20151118.indb 30
14. Place the lower part (12) of the large
grill chamber onto the cross braces
(15). Fasten the lower part to the
upper region of the support legs
using four M6 x 15 mm screws, as
well as to the cross braces using two
M6 x 15 mm screws and two M6 nuts.
Tighten the screws in the order of
assembly steps 12 – 14.
15. Put the grease can holder (34) from
below through the hole on the left side
of the large grill chamber.
34
12
15
18/11/15 3:35 PM