Kemper PROTECT RPZ Bedienungsanleitung Seite 15

EN
About this manual
Table of contents
Safety instructions
1 Functional description
2 Technical data
3 Installation
4 Commissioning
5 Flow diagrm
6 Inspection | Maintenance
7 Removal, installation and cleaning the
drain valve
8 Removal, installation and inspecting
the anti-pollution check valve
9 Troubleshooting
10 Spare parts and accessories
Manufacturer's address
Gebr. Kemper GmbH + Co. KG
Harkortstraße 5
D-57462 Olpe
Tel.: +49 2761 891-0
Web: www.kemper-olpe.de
After-sales service
Service hotline
Tel.: +49 2761 891 800
Mail: anwendungstechnik@kemper-olpe.de
About this manual
Read this manual carefully before starting instal-
lation or operation and follow the instructions!
Keep the manual in a safe place for future
reference!
Illustrations in this manual serve for a basic
understanding and may differ from the actual
system configuration.
15/28 – K410036100002-00 / 11.2020 – © www.kemper-olpe.de
Liability
16
The manufacturer assumes no warranty or liabili-
17
ty in the event of:
18
•
Failure to observe the instructions in this
20
manual.
22
•
Incorrect installation and/or operation.
23
•
Unauthorised modification of the product.
23
•
Other faulty operation.
24
Intended use
25
The PROTECT Kemper RPZ Outlet Valve Type BA
25
is used to protect the drinking water line against
26
backflow of category 4 fluids or lower according
to DIN EN 1717 / DIN 1988-100. Any other use is
considered contrary to the intended use.
Misuse
Do not use the valve to protect the drinking wa-
ter line of fluids of category 5 and only within the
operating limits indicated in the technical data..