Kemper KTS ComLog module Bedienungsanleitung Seite 18

EN
7.2 Transfer DAT file and check SD card
•
Take SD card from ComLog module
•
Copy DAT file from computer to SC card
•
Check internal recording
(Recommondation KEMPER 10 sec.)
• Insert SC card into ComLog module
• Check whether SC card's recording
•
Take SC card from ComLog module
(after approx. 10 minutes)
• Read-out SD card with computer
• Check temperature records
• Check flow rate records
Figure 4 - Extract of a ComLog file
18 / 24 – K410095502001-00 / 03.2020 – © www.kemper-olpe.de
Note!
Don't use other cards!.
KEMPER Art.-No. 9550200200