INVENTOR RG57 Benutzerhandbuch Seite 5

Features of Remote Controller buttons
NOTE:
After installing the batteries and during the
first 30 seconds period, press and hold the
remote controller's corresponding buttons
for 5 seconds to enter the Hotel Menu
settings. The LCD window will display F1.
for RG57 controller: MODE, FAN and TIMER
*
ON
for RG66 controller: MODE and FAN
*
for RG10 controller: POWER and SWING
*
IMPORTANT:
The remote controller is only enabled
within10 minutes after the indoor unit is
powered on, and the indoor unit must be
switched off.
POWER OFF button: Press this button to turn off the unit
ON/OFF
MODE button: Used to modify the selected function. Press this button to
MODE
enter the parameter setting interface, and the parameter to be modified will
be kept flashing. Using TEMP "
choosing the other parameter in conjuction with FAN & TIMER OFF button.
TEMP "
On parameter unadjustable interface, press the "
TEMP the specified function in a range of F1 ~ F9 and E1~E9. Then pressing the
MODE button to enter the parameter modifying
interface, the relevant parameter flashes, pressing "
adjust the paramter.
TIMER ON / FAN button: Press this button to confirm the setting parameter
TIMER ON FAN
and transmit the singal to the machine.
FAN & TIMER OFF button: On parameter setting interface, pressing FAN &
TIMER OFF
FA N
TIMER OFF button to select parameter to be modified.
" & " " button: Used to choose functions or adjust parameters.
q p
F1
*
ON/OFF
SHORT
CUT
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
SLEEP
TURBO
LED
RG57
" & " " button to modify the parameter or
q p
5
F1
RG66
" & " " button to select
q p
" & " " button to
q p
F1
Vane
RG10