ROCKRIDER E-EXPL700S Gebrauchsanweisung Seite 7

SCREEN AND CONTROL ELEMENTS
Display screen and function
Pedal-assist mode:
«1» mode is the default assistance mode when the screen is switched on.
1
- The power output of the motor varies according to the mode selected
- The engine output for the different modes is set out below:
Mode
% of electrical assis-
tance contribution
Example for an effort
of 100 W, the final
power will be:
2
ying
f
he
3
y cut
ode.
with
4
5
in
6
2
17:30
1
1
100
%
6
5
off
/
/
ON/OFF button:
Long press: Turn on electric-assisted bike.
«+» button:
Navigation between the different assistance modes.
Press and hold down: Activation of pedestrian mode.
This mode allows you to push the bike and walk beside it at a maximum speed of 6 km/h.
«-» button:
Short press: Navigation between the different assistance modes.
Press and hold down: Switch the lighting on and off.
Lights on by default.
Settings / Information button
Short press: Information selection
Long press: Settings menu
Battery level
Battery status
0
.0
km/h
3
speed
trip
0
km
4
1 2
+ 40% + 80%
140W 180W
3 4
+ 120% +320%
220W 420W