Screen And Control Elements; Screen Data And Function - Decathlon Riverside 100E Bedienungsanleitung

SCREEN AND CONTROL ELEMENTS

Screen data and function

Assistance mode :
- «ECO» mode is the default assistance mode when the screen is switched on.
1
- The motor power adapts according to the selected mode
- The motor power according to the modes is defined below:
Mode
Maximum assistance
speeds
ON/OFF button:
2
Short press: Switch off the electrically assisted bicycle.
Long press: Switch on the electrically assisted bicycle.
«+» button:
Short press: Navigation between the different assistance modes.
3
Press and hold down: Activation of pedestrian mode.
This mode is used to walk beside the bicycle at a speed of no more than 6 km/h.
«-» button:
4
Short press: Navigation between the different assistance modes.
Possibility of pairing a telephone or diagnostic, personalised assistance using the Decathlon app
Lighting button:
5''
5
Short press: Switch the lighting on and off.
≥ 3''
Lighting on by default.
Battery level:
6
Five battery levels. When the battery level is insufficient, the indicator will flash red.
3
5
4
off
3''
No assistance +50% assistance +100% assistance +150% assistance
1''
2 1 6
ECO NORMAL
1''
7
BOOST