Herunterladen Diese Seite drucken

Eibenstock EHD 1500 Originalbetriebsanleitung Seite 15

Diamant-trocken-kernbohrmaschine

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Application for Indented Purpose
The diamond core drill EHD 1500 is indented only for professional use and
may be used only by instructed personnel.
With an Dust Extraction (dust category M) and an appropriate drill bit, the
tool can be used for cutting of bricks, sand-lime bricks and pore concrete
(not for concrete, stone).
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction and follow the instructions
contained strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training
If the mains cable gets damaged or cut during the use, do
not touch it, but instantly pull the plug out of the socket.
Never use the tool with damaged mains cable.
The tool must neither be wet nor used in humid
environment.
Do not use the tool in an environment with danger of explosion.
Do not use the tool standing on a ladder.
Do not drill into asbestos-containing materials.
Do not carry the tool at its cable, and always check the tool, cable
and plug before use. Have damages only repaired by specialists.
Insert the plug into the socket only when the tool switch is off.
Modifications of the tool are prohibited.
Unplug the tool and make sure that the switch is off if the tool is not
under supervision, e.g. during preparation and take-down works, at
power failures, for insertion or mounting accessories.
Unplug the tool if is stops for any reason. So you avoid sudden
starts in unattended condition.
Do not use the tool it its shell, switch, cable or plug are damaged.
Always lead the mains and extension cables as well as the
dedusting hose from the tool to the back.
Electrical tools have to be inspected visually by a specialist in
regular intervals.
The tool may be used only in two-hand operation or with the drill
rig.
Keep the handles dry, clean, and free of oil and grease.
Do not touch rotating parts.
Persons under 16 years are not allowed to use the tool.
14

Werbung

loading