Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A2.2 Configuration
Before configuring Push Video, make sure:
1. The DVR system is set up as described in "2. CONNECTION AND SETUP" at page 4.
2. The DVR is connected to Internet.
3. You've installed the app, EagleEyes, on your iOS or Android mobile devices.
For details, please refer to "7.2 Mobile Devices" at page 57.
Step1: Right click to show the main menu.
Go to
(ADVANCED CONFIG.) "NOTIFY". In PUSH VIDEO, select the alarm device you want, and
configure the alarm type. For details, please refer to "PUSH VIDEO" at page 45.
CANERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DCCS
NOTIFY
EXIT
Step2: Open EagleEyes, and add this DVR to the EagleEyes address book.
Step3: Enable Push Video as described below, and try to trigger your sensor to see if you can receive Push Video
successfully.
ADVANCED CONFIG
PUSH VIDEO
PUSH STATUS
RESET ALL GUARD CONNECTION
ALARM TRIGGERED DEVICE
CH01
ALARM OFF / INTERNAL ALARM
CH02
ALARM OFF
CH03
ALARM N.O.
CH04
ALARM OFF
MESSAGE MAIL
MAIL
66
APPENDIX 2 PUSH VIDEO CONFIGURATION
FTP
SUBMIT
ALARM IN 1
CH1
CH2
office
CH4
Werbung
Kapitel
