elv MODELL 3 Bedienungsanleitung Seite 28

7) RECORD CONFIG
Click "SETUP" to enter the setting page individually for manual record, event record and timer record.
a) Select the record type you want to set.
b) In "CHANNEL", select "ALL" to apply the changes here to all channels.
Note: The I.P.S. section is based on NTSC system.
MANUAL RECORD
CHANNEL
ALL
Or, select "BY CHANNEL" to set the image size, image per second & image quality individually for each
channel.
Note: The available options for "IMAGE SIZE" depend on the recorder you have.
IMAGE SIZE
I.P.S.
QUALITY
BITRATE
QUICK START
EVENT RECORD TIMER RECORD
IMAGE SIZE I.P.S.
FHD(1080P) 240
The pixels of the image, for example, FHD(1080P) = 1920 x 1080.
The more the pixels, the clearer the image but the more the file size.
Image per second. The more the I.P.S., the more fluent the video but the more the
file size.
Image quality.
It is used to set the upper limit of the transmission number per second. The value is
from 256 to 4096.
The value set here is related to the image size. For example, here are the
recommended values:
FHD(1080P) => 2048

HD(720P) => 1024

The more the value, the bigger the file size, but the system stability might go down.
The less the value, the smaller the file size, but the image quality might go down.
22
QUALITY BITRATE (kbps)
SUPER BEST 2064
EXIT
MAIN MENU