Herunterladen Diese Seite drucken

elv MODELL 3 Bedienungsanleitung Seite 11

Hd-cctv-dvr 1080p-videoaufnahme

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 264
Step3: Fasten the hard disk to the bracket by securing the screw on the bracket.
Hard Disk
Step4: Replace the top cover and fasten the screws you loosened in Step1.
 Type 2
Note: Here takes an 8CH model as an example of how to connect a hard disk to your device. To know
how many hard disks could be installed, please refer to the specifications of your device.
Step1: Remove the top cover, and find where to install a hard disk.
Screw hole for
fastening hard disk
Step2: Get a compatible hard disk. With the PCB side facing down, find the screw holes on the DVR base, and place
the hard disk in the DVR.
Note: To use a green hard disk, use ONLY the hard disk designed especially for surveillance to ensure the
device works properly.
CR2032
CR2032
5
CONNECTION AND SETUP

Werbung

loading