Installation Steps - Homcom 370-096 Bedienungsanleitung

Step 1
Install the rear wheel
Installing the other side wheel is the same as step 1.
Step 2
Install the bumper
Install the bumper on the front of the car as shown by the arrow
and screw it in place

INSTALLATION STEPS

As shown in the arrow, insert the shaft frame into the
car body, pass the axle sleeve, gasket, rear wheel,
gasket and nut (as shown in Figure 1) through the axle,
and tighten the nut clockwise (as shown in Figure 2).
A rear axle
Axle sleeve
wheel
Gasket
Nut
(4X(4X10)SCREW)
wheel
Gasket
Gasket Nut
Gasket
A rear axle
Axle sleev