Cameo KLING TILE 144 Bedienungsanleitung Seite 17

13
MOUNTING RAIL / MONTAGESCHIENE / RAINURE DE MONTAGE / CARRIL DE MONTAJE / SZYNA MONTAŻOWA / GUIDA DI MONTAGGIO
EN
Mounting rail to fit the connection pieces.
DE
Montageschiene zum Anbringen der Verbindungsstücke.
FR
Rainure de montage pour fixation des éléments de liaison.
ES
Carril de montaje donde colocar la pieza de unión.
PL
Szyna montażowa służy do przymocowania elementów łączących.
IT
Guida di montaggio per il fissaggio dei raccordi.
14
CONNECTION PIECES / VERBINDUNGSSTÜCKE / ÉLÉMENTS DE LIAISON / PIEZA DE UNIÓN / ELEMENTY ŁĄCZĄCE / RACCORDI
15
MOUNTING BRACKET / MONTAGEBÜGEL / SUPPORT DE MONTAGE / SOPORTE DE MONTAJE / PAŁĄK MONTAŻOWY / STAFFA DI
MONTAGGIO
OPERATION / BEDIENUNG / UTILISATION / OPERACIÓN / OBSŁUGA / UTILIZZO
EN
NOTE
A few seconds after the spotlight has been correctly connected to the mains, it is ready for use and starts with the mode that was previously select-
ed. After the start, the firmware version appears briefly on the display.
SETTING THE OPERATING MODE (Operating mode)
Use the UP and DOWN buttons to select the "Operation Mode" menu item and confirm by pressing ENTER. The required operating mode can now be
selected as desired by using the UP and DOWN buttons and activated by pressing ENTER. Press MODE to exit the sub-menu.
Operating modes: Manual Mode, DMX Mode, Art-Net Mode, Kling-Net Mode, Slave Mode, Auto Mode.
Operation Mode
Sub-menu items and explanations:
Operation Mode
Manual Mode Dimmer
Shutter
Red
Green
Blue
Color Macro
Auto Program
Auto Speed
DMX Mode 8CH
432CH
Art-Net Mode 8CH
432CH
Kling-Net Mode
Slave Mode
Auto Mode Speed
Program
SETTING THE DMX START ADDRESS (DMX Address)
Use the UP and DOWN buttons to select the "DMX Address" menu item and confirm by pressing ENTER. The required start address can now be se-
lected as desired by using the UP and DOWN buttons and activated by pressing ENTER (DMX Address 001 - 512). Press MODE to exit the sub-menu.
You will find tables with the channels of the different DMX modes in this manual under DMX CONTROL.
DMX Address
001
000 - 255 Dimmer 0 - 100%
000 - 005 Stroboscope deactivated
006 - 255 Strobe (slow -> fast)
000 - 255 Red 0 - 100%
000 - 255 Green 0 - 100%
000 - 255 Blue 0 - 100%
000 - 255 15 colour macros + colour change + colour fading,
see DMX table 8 CH mode, channel 6
000 - 255 Program 1 -24, see DMX Table, 8 CH Mode, channel 7
000 - 255 Auto Program speed slow -> fast
see DMX tables
see DMX tables
to start, press ENTER
to start, press ENTER
1 - 9 Program Speed
01 - 29, Mix Program selection
confirm with ENTER
confirm with ENTER
confirm with ENTER
confirm with ENTER
confirm with ENTER
confirm with ENTER
confirm with ENTER
confirm with ENTER
confirm with ENTER
confirm with ENTER
confirm with ENTER
confirm with ENTER
confirm with ENTER
17