Product Description; Set - CONDTROL Unix 360 Pro Bedienungsanleitung

H
17
16
14
13
8
CONDTROL UniX 360 Pro
11
10
12
15
EN CROSS LINE LASER

PRODUCT DESCRIPTION

This cross line laser UNIX 360 Pro CONDTROL is intended for determining and checking
horizontal and vertical lines. (see figure A-C). This mode allows constructing inclined planes
(see figure D).
The measuring instrument is suitable for operation in enclosed working sites and outdoor.
It has 2 operation modes:
- working with automatic levelling. Levelling function automatically compensates
irregularities
within the self-levelling range of ±4°(see figure E,F).
- working without automatic levelling for inclined planes. (see figure D)
PULSE mode allows to use laser receiver to increase a working range of the instrument or to
work when laser is hard to define in bright lighting conditions.
1 - Laser lines apertures
2 - Mode switching button
3 - Switch on/off pulsed mode button / automatic levelling switch on/off
4 - Low Battary indication
5 - Pulse mode indication
6 - Battery cover
7 - Tripod mount 1/4''
8 - On/Off switch
9 - Crew mount
10 - Tripod 1/4''*
11 - Tripod-Transformer*
12 - Universal Wall Mount *
13 - Pouch
14 - Laser intensive Glasses*
15 - Electronic Receiver*
16 - Tripod-mini*
17 - Universal mount Clamp*
* The accessories illustrated or described are not included as standard delivery set.

SET

Cross line Laser – 1 pc.
Pouch – 1 pc.
Power supply (AA) – 3pcs.
User manual – 1pc.
CONDTROL UniX 360 Pro
User manual
9