Carrera RC 10106 Montage Und Anwendung Seite 8

Positioning
receiver/tower
Receiving radius 3 m/9.84 ft.
1
2
The tower contains the infrared-receiver which passes on the sig-
nals of the infrared-transmitter (located in the WIRELESS speed
controller) to the Carrera DIGITAL 124/132 car. In order to be able to
receive the signals permanently the WIRELESS transmitter (speed
controller) should be kept at a maximum range of 3 metres from the
receiver/tower in visibility (cf. Fig. and
1 2
receiving radius a further receiver/tower can be connected to the
Black Box (cf. Fig. ).
2
8
Insertion/exchange of batteries
1
To operate the WIRELESS speed controller 3 x AA (R6) batteries
are required (not included in delivery). A reduced range between the
speed controller and the receiver/tower and a minor driving perform-
ance of the vehicles are an indication of a battery power drop. In this
case the batteries need to be exchanged at the bottom of the speed
controllers (fi g.
1
Using new batteries/rechargeable batteries a permanent playing
time of approx. 48 hours or a standby time of approx. 200 hours
can be assumed.
ATTENTION:
Operation with rechargeable batteries is not possible.
). To achieve a larger
2
OFF / ON
) as illustrated (fi g. ).
2
Preparation of start
1
TOWER
1
2 3
Please connect the receiver as shown in fi gure
ing one tower it is irrelevant which speed controller-connector you
choose to connect the receiver/tower. Please take into considera-
tion that the WIRELESS system only works with the signals of the
WIRELESS speed controller being able to be received by the re-
ceiver, not being interrupted by any objects or persons.
The Carrera 124/132 Black Box allows a mixed operation of WIRE-
LESS- and wired speed controllers ( up to a maximum of 6 speed
controllers).
Switch on Black Box as per fi gure . Turn on speed controller on
2
bottom-side (fi g. ). Directly after the speed controller has been
3
switched on the speed controller´s encoding will be indicated by
the number of fl ashings, see fi gure (e.g. fl ashing 3x = speed
4
controller 3). After 2 seconds the LED switches to a fl ashing rhythm
at regular intervals indicating readiness for operation. In case the
speed controller is not activated it automatically switches to the
energy-saving mode after 20 seconds. By pressing the tappet or the
lane-change-button the speed controller can be reactivated.
TOWER
2
4
1 . When connect-