NAMCO Ridge Racer V Arcade Battle Betriebsanleitung Seite 73

8-14 Replacing the Pedal Potentiometer
1. Remove the pedal asembly.
2. Slacken the hex socket screw (M4x8) and remove the potentiometer
complete with potentiometer bracket.
Ground lead
Whizztite Nut
Connector
Cable clip
3. Replace the potentiometer ensuring that the correct colour wires go to the
correct terminals.
Potentiometer
Note: When replacing the potentiometer
ensure that the hex socket screw engages
on the flat of the potentiometer shaft.
4. Reassemble in reverse order.
Note: After replacing the potentiometer ensure that the game is re-
initialized.
(see 8-13 page 72)
Accelerator pedal Assy
Connector
Flat washer
Potentiometer bracket
(see section 7 page 55)
Page 73
Hexagonal
wrench
Hex socket screw (M4 x 8)
Potentiometer bracket
Accelerator pedal
Assy
Hexagonal nut
Potentiometer
1 2 3
Spring
washer
White White
/black /blue
Brake pedal Assy
Brake pedal
Assy
Potentiometer
1 2 3
White
White White White
/red
/black /blue /red