NAMCO Ridge Racer V Arcade Battle Betriebsanleitung Seite 48

6-3-3-1 I/O PCB Test
1. Select ‘I/O PCB CHECK’ from the I/O Test Screen. The following
screen is displayed:-
Note: This screen is for information only. No adjustments are available.
6-3-3-2 Go to [I/F Initialize]
This item initializes the control devices.
Selecting this option displays the I/F INITIALIZE screen which allows
initialization of the Potentiometer settings for the Steering wheel,
Accelerator and Brake Pedals.
(see 7 page 55)
I / O TEST
DIP SW
LINK
LINK AS
I / O PCB CHECK
namco ltd: FCA-1: ver 1.00: EXP
Multipurpose + Rotary Encoder
I/O PCB CONNECT OK NAMCO LTD.
EXIT
SELECT SW : CHOOSE
Page 48
1234 [ON : RED]
ON
1 (LEFT)
ENTER SW : ENTER