NAMCO Ridge Racer V Arcade Battle Betriebsanleitung Seite 69

8-10 Replacing the Steering Potentiometer
1. Remove the steering assembly.
2. Remove 2off hex socket head screws (M4x10) holding the potentiometer
mounting bracket to the front plate.
3. Slacken the grub screw (M4x10) and remove the potentiometer complete
with the mounting bracket.
Grub screw (M4x10)
4. Replace the potentiometer taking care to replace the correct colour wire
to the correct terminal.
5. Reassemble in reverse order.
Note: When refitting the potentiometer ensure that the grub screw engages
on the flat of the potentiometer shaft.
6. After replacing the potentiometer ensure that the game is re-
initialized.
Hex socket head screw (M4x10)
(see section 7 page 55)
Page 69
(see 8-9 page 68)
Mounting bracket
Potentiometer