NAMCO Ridge Racer V Arcade Battle Betriebsanleitung Seite 49

6-3-3-3 Switch Test
1. Select “Switch Test” on the I/O menu screen to test the switches.
The following screen is displayed.
2. The display shows the current state of the switches.
3. Press the Up Select switch and the Enter switch together to EXIT and
return to the I/O menu screen
(a)
(b to f)
(g)
.
(h)
(i)
(j,k,l)
Note:
I / O TEST
DIP SW 1234 [ON : RED]
LINK ON
LINK AS 1 (LEFT)
SWITCH TEST
COIN 0
SERVICE OFF
TEST ON
UP SELECT OFF
DOWN SELECT OFF
ENTER OFF
STEERING +000 RIGHT OK
GAS 000 OK
BRAKE 000 OK
DOWN SHIFT OFF
UP SHIFT OFF
VIEW CHANGE OFF
EXIT
SELECT SW : CHOOSE ENTER SW : ENTER
Not Used
Display will change from OFF to ON each time a switch is
operated.
Numbers increase when the steering is turned to the right and
decrease when turned to the left. Right OK and Left OK is
diplayed just before the steering wheel is turned to its full
extent. Centre is displayed when the steering wheel is in the
central position.
Numbers increase when the accelerator pedal is pressed, and
OK is displayed just before the pedal reaches its full travel.
Numbers increase when the brake pedal is pressed, and OK
is displayed just before the pedal reaches its full travel.
The display will change from OFF to ON each time the switch
is operated.
If Left OK or Right OK is not displayed when the steering is
turned or OK is not displayed when the pedals are pressed
reinitialize the game.
Page 49
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
(l)
(see 7 page 55)