NAMCO Ridge Racer V Arcade Battle Betriebsanleitung Seite 47

6-3-3 I/O Test
1. Select “I/O TEST” on the menu screen to test the switches and lamps.
The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press
the Enter button to enter the test.
3. Select “EXIT” and press the Enter button to return to the menu screen.
DIP SW
LINK
LINK AS
I /O PCB CHECK
GO TO [I /F] INITIALIZE
SWITCH TEST
LAMP TEST
EXIT
SELECT SW : CHOOSE
(a) Shows the condition of the DIP Switches on the PCB. In normal operation
all switches are ON. (If a switch is ON, it will be displayed in red.)
(b) Shows the condition of link.
LINK ON
LINK OFF
LINK NGa
(c) Displays the Game PCB ID. (Either 1 (LEFT) or 2 (RIGHT))
(d) Checks function of I/O PCB.
(e) Initialize game potentiometers.
(f) Selecting this item allows all switches to be checked.
(See 6-3-3-3 page 49)
(g) Selecting this item allows the testing of the lamps.
(See 6-3-3-4 page 50)
I / O TEST
1234 [ON : RED]
ON
1 (LEFT)
ENTER SW : ENTER
Normal (Two seats are linked)
No communication
Unknown data received.
(see 6-3-3-1 page 48)
(see Section 7 page 55)
Page 47
(a)
(b)
(c)
(d)
(e)
(f)
(g)