Meister basic BFS 600 Originalbetriebsanleitung Seite 71

5413060-Farbspritz-man.qxd
• Never block the nozzle of the spray
gun using your body or a body part.
The high exit pressure may cause
serious injuries.
• Never allow paint to dry in the gun or
the container! Dry paint residues will
prevent the nozzle from working
properly and may also place
limitations on guarantee claims.
• Never use liquids containing solids
with this device, for example, liquids
with a high fibre or particle content,
metallic paints, fire-proof paints or
liquids containing asbestos particles.
• Do not use highly flammable liquids.
Always ensure that your surroundings
are well ventilated! Always observe
the packaging information provided
by the manufacture of the materials
you are using!
• Never use the spray gun outdoors
when it is raining! When using the
spray gun, you must wear a breathing
mask, goggles and ear defenders.
• When interrupting or finishing work,
always unplug the device from the
power supply to ensure that it cannot
be switched on unintentionally.
• Only use three-core extension cables!
• Only connect the device to the power
supply or extension cable using the
three-pin grounded plug.
• Keep the device out of the reach of
children!
• Do not dismantle the device yourself!
This could cause injury!
• During the spraying process, try to
keep the device horizontal in order to
02.02.2010 12:07 Uhr
prevent the liquid from leaking! If
liquids come into contact with
internal cables and contacts this may
cause an electric shock!
• After use, clean the device
thoroughly. Oil after use to ensure the
device continues to function
correctly.
• Never submerge the device in water
or other liquids.
• Avoid body contact with the spray jet!
• Always use the add-on or accessory
recommended by the manufacturer in
order to prevent injuries as much as
is possible.
To ensure safe operation
• Always keep your work place clean.
Objects standing or lying in the
immediate vicinity represent a safety
risk.
• Ensure your work area is suitable. Never
expose electrical devices to excess
moisture or rain. Always keep your work
place dry! Never use electrical devices
in areas prone to explosion.
• Prevent the risk of electric shocks! If
possible, avoid making body contact
with objects resting on the ground, for
example, cables, fridges, radiators etc.
• If the tool is not in use it should be
stored in a dry, clean place away
from children.
• Only use the tool for its intended
purpose.
• When working, always wear suitable
clothing including appropriate hand
protection and non-slip shoes.
Seite 71
71