Components; Correct Use; General Safety Instructions For Handling Power Tools - Meister Basic Bfs 600 Originalbetriebsanleitung

5413060-Farbspritz-man.qxd
CAUTION! The vibration emission
value may fluctuate from the
specified value during use of the
electrical tool. These fluctuations will
depend on the way in which the tool is
used.
Safety measures must be taken in
order to protect the operator. As a
result, the evaluation of the
disturbance must be made whilst
taking account of the actual conditions
of use. (All parts of the operating cycle
must be taken into account for this
purpose. This also includes times in
which the tool is switched off and
times in which it is switched on, but is
running without load.)
3 – Components
1 Paint container
2 Feed hose
3 Compressor
4 Pressure hose
5 Spray cap and securing ring
6 Seal
7 Needle
8 Paint quantity regulator
9 Viscosity measuring beaker
10 On/Off switch
11 Holder for the spray gun
12 Handle with trigger
13 Carrying belt
4 – Correct use
Suitable for spraying materials with
solvent and water based paints using
airless techniques. This includes latex,
oil and alkyd based paints. Observe the
manufacturer's instructions. All other
uses are expressly forbidden.
This unit is only designed for domestic
68
use.
02.02.2010 12:07 Uhr
Figures a-f on page 5 give a number of
examples, for which the spray gun can
be typically used.
clean it after each use. Failure to do
this voids the guarantee.
5 – General safety
Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains operated (corded)
power tool or battery-operated
(cordless) power tool.
This unit may not be used by people
(including children) with reduced
physical, sensory or mental capacities,
with a lack of experience and without
the appropriate knowledge, unless they
are supervised by someone who is
responsible for their safety or have been
instructed by such a person with regard
to how the unit is to be operated.
Children should be supervised to ensure
that they do not play with the device.
1 Work area
a Keep work area clean and well lit.
b Do not operate power tools in
Seite 68
CAUTION: In order to ensure the
spray gun functions correctly,
instructions for handling
power tools
WARNING! Read all safety
warnings and all instructions.
Cluttered and dark areas invite
accidents.
explosive atmospheres, such as in