Device Operation - Royal Catering Rcsco-01 Benutzerhandbuch

6) Device operation:

A) Warming up, cooking, time and maintaining temperature
Turn on the power switch (the device will beep), the display will show the default
•
temperature or the temperature set last time it was used.
Set the cooking temperature, the corresponding LED will flash while setting, and the LED
•
will be on when setting is completed.
Set the cooking time, the corresponding LED will flash while setting, and when the setting
•
is completed, the LED will be on.
Set the holding temperature, the corresponding LED will flash during setting, and the LED
•
will be on when setting is completed.
Press "Start/Stop" to start working, the corresponding LED will light up, warming up will
•
start. If you press "Start/Stop" again, the operation will pause and the LED will flash
(other data can be adjusted in pause mode).
When the set temperature is reached, you will hear the device emit an acoustic signal
•
lasting 1 second, the cooking LED and the set temperature display and the "Start/Stop"
LED will flash. Press "Start/Stop" to turn off the beeper, press "Start/Stop" again to enter
countdown mode. (Food can be placed in the oven once the set temperature is reached.)
The set temperature, actual indoor temperature and countdown time will be displayed
•
alternately every 4 seconds.
When the countdown ends, you will hear a 15-second beep as a warning and the cooking
•
light will flash. The acoustic signal will automatically stop after 15 seconds and the
cooking light will turn off. The oven will automatically switch to sustain mode.
The set temperature and time will be displayed alternately every 4 seconds.
•
During operation, only the "Start/Stop" button will work, the other buttons will be
•
locked. (Press "Start/Stop" for more than 2 seconds to unlock the whole working process
and enter standby mode).
B) Preheating, cooking, sensor and maintaining temperature
Turn on the power switch (the device will beep), the display will show the default
•
temperature or the temperature set last time it was used.
Set the cooking temperature, the corresponding LED will flash while setting, and the LED
•
will be on when setting is completed.
Set the sensor temperature, the corresponding LED will flash during setting, and the LED
•
will be on when setting is completed.
Set the holding temperature, the corresponding LED will flash during setting, and the LED
•
will be on when setting is completed.
Press "Start/Stop" to start working, the corresponding LED will light up, warming up will
•
start. If you press "Start/Stop" again, the operation will pause and the LED will flash
(other data can be adjusted in pause mode).
The set temperature and actual internal temperature will be displayed alternately every
•
4 seconds.
When the set temperature is reached, the device will beep for 1 second, the cooking LED
•
and the set temperature display and the "Start/Stop" LED will flash. Press "Start/Stop" to
turn off the beeper, press "Start/Stop" again to enter sensor mode. (Food can be placed
in the sensor oven once the set temperature is reached.)
When the sensor temperature is reached, you will hear a 15-second beep as a warning
•
and the sensor LED will flash. The acoustic signal will automatically stop after 15 seconds
and the sensor LED will turn off. The oven will automatically switch to sustain mode.
The set temperature and time will be displayed alternately every 4 seconds.
•
EN