Additional Notes - Gf Rse 180 Bedienungsanleitung

Instruction manual
Remove the mandrel
3
Rotate the grip so as to unfasten the mandrel from the pipe. Remove then the mandrel.
Note
After removing the peeler tool from the pipe, always make sure that you have completely peeled the marked area.
5.5

Additional notes

In case of an insufficient peeling result the blade has to be replaced.
•
In consideration of the installation instructions of the fitting manufacturer and the tolerances specified therein (max. gap bet-
•
ween pipe and fitting) the pipe may be peeled a second time.
The peeler blades are subject to wear.
•
Use only on cleaned pipe surfaces.
•
Keep the pipe end peeler RSE clean and dry in the box or case!
•
The thickness of the peeling must be checked with a circumferential measuring tape on a regular basis.
•
33