Peeling Procedure - Gf Rse 180 Bedienungsanleitung

Instruction manual
5.3

Peeling procedure

Step
1 Clamping and fixing the pipe
Fix or clamp the pipe before you begin peeling it to improve the peeling result and prevent accidents.
Rotate the pressure nut in lower position
2
Release the pressure nut in the lower position as shown in the figure.
3 Beginning the peeling procedure
The peeling procedure begins at the pipe end and continues a clockwise direction away from the pipe end. Begin the
peeling procedure slowly at first and watch the result. After a few rotations you can increase the speed.
Action
31