GF RSE 180 Bedienungsanleitung Seite 29

Instruction manual
Check the peeling length
4
The usable peeling length (L in the figure) depends on the insertion depth of the mandrel.
If you want to use the maximum length, the spindle must be inserted more deeply into the pipe. The image shows as an
example the insertion for a 160mm diameter tube.
5 Tighten the mandrel
Insert the support as far as it fits into the mandrel (see the detail in the figure). Then gently rotate the support clockwise
to tighten the mandrel on the pipe.
L
L
29