GF RSE 180 Bedienungsanleitung Seite 30

Instruction manual
Rotate the pressure nut in upper position
6
Place the pressure nut in the upper position as specified in the figure below.
7 Place the support at the end of the pipe
Place the support on the pipe without pressing (the internal spring is already tensioned). Make sure that the blade is
positioned correctly at the end of the pipe (look at the vertical sign). Once the position in the figure is reached, turn the
handwheel to fix the support in a stable manner.
Note
The peeler blade must rest on the pipe end in such a way that during the first rotation no section of the pipe end
remains unpeeled. This ensures that the whole pipe end will be peeled successfully.
Carefully lower the peeler blade so that it does not abruptly hit the pipe surface.
30