Peeler Preparation - Gf Rse 180 Bedienungsanleitung

Instruction manual
5.2

Peeler Preparation

Step
1 Insert the expanding mandrel inside the pipe
Make sure the mandrel is closed before performing the operation, otherwise turn the grip counter-clockwise. Insert the
mandrel inside the pipe as shown in the figure.
2 Turn the grip to expand the madrel
Turn the grip clockwise while inserting the mandrel into the pipe. Once the mandrel has been inserted to the desired
depth (see also point 4), rotate the grip so as to firmly fasten the mandrel to the pipe. Check that the mandrel has been
inserted in axis with the pipe and that there are no misalignments.
3 Insert the support into the mandrel
Rotate the handwhell anticlockwise and position the support at the maximum height, then insert it into the mandrel.
Press the button shown in the figure to allow the rod to enter the corresponding hole.
28
Action