Faults And How To Remedy - Wolf Garten Power Edition 34 E Gebrauchsanweisung

Maintenance
Cleaning
Note: Disconnect electricity by unplugging cable
at the socket before proceeding.
hands clear of moving blade.
Clean mower thoroughly after each mowing with cloth or
brush.
Clean the mulch flap at regular intervals with a small broom
Do not spray with water.
Winter Storage
• Clean mower thoroughly before storing away.
• Have your mower thoroughly checked once a year by an
approved Service Centre.
• Do not store it in a wet or humid place.

Faults and how to remedy

Problem
Uneven running, heavy
vibrations in the mower
Motor will not run
Poor mowing
Poor catching
When in doubt, always consult a WOLF service workshop.
Important: switch off the mower and disconnect the mains plug before inspecting, cleaning or working on the blades.
ttention: Keep
Possible cause
• Blades damaged
• Blades loose in the fastening parts
• Fuse blown
• Cable damaged
Important! If you inadvertently cut through the
cable, the fuse (16 mp.) will not always blow.
In the interest of safety, never touch damaged or servered
cables before disconnecting the mains plug. Repairing the
cable with insulating tape is prohibited.
• Blunt blades
• Incorrect cutting height
• Blunt blades
• Catcher bag blocked
• Incorrect cutting height
Change of cutter blade T
Note: always disconnect mains supply and wear
protective gloves before undertaking any work at
the cutter blades, cutter bar and blade coupling.
Change cutter blade using 10 mm spanner as illustraded.
Torque wrench setting for screws 8-10 Nm. Take care to
.
S
carry out this work thoroughly. Use original spare parts only.
Note: Sharpining of blades should be done by an
approved service centre as the correct balance of the
blade after sharpening is very important and ought to
be checked by an expert.
Remedy (X) by:
WOLF
service-workshop
X
---
---
X
X
---
X
---
---
Yourself
---
X
X
---
---
X
---
X
X
15