ECS RX480-A Handbuch Seite 47

Scroll to this item and press <Enter> to view the following screen:
Resume by PCI PME (Enabled)
This item specifies whether the system will be awakened from power saving modes when
activity or input signal of the specified hardware peripheral or component is detected.
Resume by USB (S3) (Disabled)
This option allows the activity of the USB devices to wake up the system from S3 sleep
state.
Resume by PCI-E (Enabled)
This item specifies whether the system will be awakened from power saving modes when
activity or input signal of the specified hardware peripheral or component is detected.
Resume by WOL/WOM/Ring (Disabled)
This item specifies whether the system will be awakened from power saving modes when
activity or input signal of WOL/WOM/Ring device is detected.
Resume by PS2/Mouse/Keyboard (Disabled)
These items enable or disable you to allow keyboard or mouse activity to awaken the system
from power saving mode.
KB Resume Password (Enter)
Use this item to define the password when using the keyboard to resume the system.
Hot Key Resume (Ctrl-F1)
Use this item to define the password when using the keyboard "hot key" to resume the
system.
RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can set the date (day of
the month), hour, minute and second to turn on your system. When set to 0 (zero) for
the day of the month, the alarm will power on your system every day at the specified
time.
Downloaded from www.Manualslib.com
Resume Event Control (Press Enter)
Phoenix-AwardBIOS CMOS Setup Utility
Resume By PCI PME
Resume By USB (S3)
Resume by PCI-E
Resume By WOL/WOM/Ring
Resume By PS2/Mouse
Resume By PS2/Keyboard
KB Resume Password
Hot Key Resume
RTC Alarm Resume
x
Date (of Month) Alarm
x
Time (hh:mm:ss) Alarm
: Move Enter: Select
F5:Previous Values
• Date of Month: Use this item to define the date of month when using the RTC
alarm to resume the system.
• Resume Time: Use this item to define the time when using the RTC alarm to
resume the system.
manuals search engine
Resume Event Control
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Enter]
[Ctrl-F1]
[Disabled]
0
0 0 0
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6:Fail-Safe Defaults F7:Optimized Defaults
Using BIOS
Item Help
Menu Level
41