Checking Jumper Settings; Setting Jumpers - Ecs Rx480-A Handbuch

8
Do not over-tighten the screws as this can stress the motherboard.

Checking Jumper Settings

This section explains how to set jumpers for correct configuration of the motherboard.

Setting Jumpers

Use the motherboard jumpers to set system configuration options. Jumpers with more than
one pin are numbered. When setting the jumpers, ensure that the jumper caps are placed on
the correct pins.
The illustrations show a 2-pin jumper. When
the jumper cap is placed on both pins, the
jumper is SHORT. If you remove the jumper
cap, or place the jumper cap on just one pin,
the jumper is OPEN.
SHORT OPEN
This illustration shows a 3-pin jumper. Pins
1 and 2 are SHORT
Installing the Motherboard
Downloaded from www.Manualslib.com manuals search engine