ECS RX480-A Handbuch Seite 20

14
CPU Installation Procedure
The following illustration shows CPU installation components.
1
2
3
4
5
Downloaded from www.Manualslib.com
Install your CPU. Pull up the lever away from the
socket and lift up to 90-degree angle.
Locate the CPU cut edge (the corner with the pin
hold noticeably missing). Align and insert the CPU
correctly.
Press the lever down and apply thermal grease on
top of the CPU.
Put the CPU Fan down on the retention module and
snap the four retention legs of the cooling fan into
place.
Flip the levers over to lock the heat sink in place and
connect the CPU cooling Fan power cable to the
CPUFAN connector. This completes the installa-
tion.
To achieve better airflow rates and heat dissipation, we suggest that you use
a high quality fan with 4800 rpm at least. CPU fan and heatsink installa-
tion procedures may vary with the type of CPU fan/heatsink supplied. The
form and size of fan/heatsink may also vary.
Installing the Motherboard
manuals search engine