Mem Edit" - Deleting A Value In Memory And Enter A New Value - Gossen MetraWatt SECULIFE IM Bedienungsanleitung

„Mem-Edit" – Deleting a value in memory and entering a new value
4.4.3
Hold
Mem
10
The Mavolux offers the function „Mem Edit" for correcting a
value stored in the memory. Measure again, press the Hold key
and the new value is locked. Then by pressing one of the range
keys, you can browse through the memory.
At the memory location to be
corrected press now the key
Mem. An acoustic signal confirms
„value stored in memory". In the
display the measurement value
stored is indicated for a few
seconds alternating with the
number of the memory location.
Subsequently the
SECULIFE IM will return to
measuring function.
GMC-I Messtechnik GmbH