Mem-Edit - Overwrite A Saved Measured Value - Gossen MetraWatt SECULIFE IT BASE Bedienungsanleitung

3.4.3 Mem-Edit – Overwrite a Saved Measured Value
Hold
Mem
14
The SECULIFE IT
BASE
correcting a stored value in the memory. Measure again,
press the Hold key and the new value is logged in. Then, by
pressing one of the range keys, you can scroll through the
memory.
offers the function „Mem Edit" for
At the memory space to be
corrected press down the key
Mem. Then the display shows
the saved value for a few
seconds alternating with the
number of the memory space.
Subsequently the SECULIFE
IT will return to measuring
BASE
mode.
GMC-I Messtechnik GmbH