Commissioning; Installation - Decoderwerk 30302 Handbuch

Commissioning

The decoder is intended for mounting in a
◆
Märklin or Trix C-track turnout and has 4
mounting holes for this purpose.
Carefully press the
◆
mounting pins provided in the inner bed of
the turnout.
The side fitted with components always
◆
points towards the switch.
The surface of the installation location and
◆
other materials in contact with the decoder
should be made of non-conductive material.

Installation

decoder onto the
Field of application
The decoders are designed for a storage
◆
and continuous operating temperature
range of 0-50° Celsius.
Avoid strong temperature fluctuations.
◆
5